Global F180 TV Distribution Amplifier 8 Ways Coax
Global F180 - 8 way amplifier enables use of 8 TV links. Mains Power connection is included. The F Series TV booster/splitters are designed to amplify the UHF (TV) or FM (Radio) signals in a poor signal area or to distribute the TV signals around the house. Typically these amplifers are installed in the loft or next to the signal source, e.g. Sky or Freeview receiver.
Distribute TV signals to 4 rooms in the house
The F140 Professional signal amplifier is designed to amplify UHF (TV) or FM (Radio) signals in a poor signal area or to distribute the TV/Radio signal around the house. Typically these amplifers are installed in the loft or next to a signal source that is to be distributed, e.g. Sky or Freeview receiver.
- Professional 'F' type connectors giving a solid connection
- 4 outputs each with 7dB boost to signal strength
- Robust and durable casing
- Fully compatible with tvLINK Magic Eye
Unlike many RF distribution amplifiers the Global F series are tvLINK compatible, i.e. they pass power from a Sky receiver onto any connected tvLINK Magic Eye Remote Control Extenders. The booster is also designed to carry the return signal from a tvLINK remote control extender back to the Sky digibox. This enables the viewer to watch and control from several locations.
The F140 can either be powered by a Sky digibox (from the RF2 port) or via the mains with the optional Global Mains PSU or by adding a DC inserter to the input cable.
All connectors on the F140 amplifiers are professional 'F' type connectors for excellent signal coupling providing high quality sound and vision throughout the system.
IMPORTANT NOTE: The Global F140 does not come with a mains power supply. The F140 unit is meant to be powered by the RF2 output on a Sky receiver, or alternatively by an additional Global Mains PSU .
Tips for a better signal quality
Good quality WF100 or WC100 double sheilded coax cable should be used with these amplifiers. The better the cable the better the picture and sound will be on the destination TV's. Cheap, low quality coax cable will cause interference, loss of signal and poor quality picture and sound.
Detailed Specifications
No. Outputs: 4
Connectors: F Connector
Power requirements: DigiboxRF2/Optional Mains Adapter
Gain @ 12V Supply (dB): 7
Freq. Range (MHz): 47-860MHz
Noise Fig. (dB): 3
Isolation between Outputs (dB): 25
Input return Loss (dB): 7
Output Return Loss (dB): 7
tvLINK Compatible: YES
Indoor or Outdoor Use: Indoor
See the diagram below for an example configuration:
