Digisat Pro Emitor Twin Meter
Digisat Pro Emitor Twin Meter , Digital Satellite Twin meter One in -Two out. Useful tool to have when re-align or installing a dish.
Full featured digital and analog satellite meter with LCD screen. Ideal for setting up a motorised or fixed dish system. The Digisat Pro offers Diseqc Switch testing and will check both LNB's at once in a Two-Satellite diseqc system. Furthermore the Pro can drive a Diseqc Motor East and West, ideal for moving the motor while you set up and track the arc on a motorised system. These meters are very sensitive & can detect weak signals. Works very well in Europe, America and Canada. Also useful for caravans etc.
2 LNB's at the same time
Can detect 13/18 V +22 kHz + DiSEqC from the receiver
Can transmit 22 kHz and DiSEqC to the LNB
Can be set up as a 2-way switch (13/18 V, 22 kHz and DiSEqC)
Can run a DiSEqC - motor (East/West) with DiSEqC 1.2 Digisat PRO Emitor
|
| Features |
● Satfinder which measures on two LNB´s at the same time.
● Measured information is displayed on the LCD.
● DiSEqC, 22 kHz, 13/18v and mA readout.
● Generate DiSEqC, 22 kHz and 13/18v to control LNB/switch.
● Also works as a 2-way switch (13/18v, 22 kHz or DiSEqC).
● Operates DiSEqC 1.2 actuators (East/West and reset).
● Built in beeper, higher tone - better signal.
● Very sensitive, easy to maximize weak and strong signals.
● 950-2150 MHz input frequency.
● F-connectors, CE-approved. |
| Technical specification |
Input frequency: 2 x 950-2200 MHz.
Input level: 20-100 dBuV.
Through loss: 5 dB.
Input impedance: 75 Ohm, F-connectors.
Output impedance: 75 Ohm, F-connector.
Short circuit protection: Automatic fuses on all inputs.
Measuring method: Signal presentation on LCD
display in form of thermometer
scales or three digit number.
Pitch-tone indication on loudspeaker.
Max-level: Thermometer-scales showing
max. Three digit numbers
showing highest value. Highest
tone on loudspeaker. Max holdfunction.
Voltmeter: Voltmeter 0-30 volt. 0-900 mA.
Indications: Voltage, current.
22 kHz (on/off).
MiniDiSEqC (toneburst).
DiSEqC 1.0 and 1.1.
Transmitting: 22 kHz (on/off).
MiniDiSEqC (toneburst).
DiSEqC 1.0 and 1.1.
Actuator control: DiSEqC 1.2.
Powersupply: From receiver via coaxial cable.
External DC-power supply 12-
18V Centerpin +.
Power consumption: Appr. 35 mA without loudspeaker.
Appr. 50 mA with loudspeaker.
Weight: 0.1 kg.
Dimensions: 145 x 55 x 20 mm.
Options: Battery-pack.
Carrying-case. |
