HomePlug Network Extender Single PL-85PE

 

This Single pack of Home Plugs puts a network point anywhere in the house where there is a mains socket. Each unit can both send and receive. Initially two of these units are needed. They are both identical. Plug one into a mains socket near the router. Connect a network lead from the router to the Homeplug. Plug a second unit into a mains socket in the room where you need the network point. Then a network lead to the computer or satellite receiver. The data is transferred through the mains wiring. No problems with wireless interference of wireless security problems.

Additional single units can be added to other rooms - up to 200! Ideal for Linux based receivers like CubeRevo, Technomate and Dreambox where the receiver may not be near a network point but is near a mains socket.

We tested Homeplug with a standard home network setup that incorporated a 4-port wireless router and there was nothing to do, the item worked straight out of the box.

Model : Solwise PL-85PE Homeplug Ethernet Adaptor Single Unit ( minimum 2 are required to create a network)

This Single pack of Home Plugs puts a network point anywhere in the house where there is a mains socket. Each unit can both send and receive. Initially two of these units are needed. They are both identical. Plug one into a mains socket near the router. Connect a network lead from the router to the Homeplug. Plug a second unit into a mains socket in the room where you need the network point. Then a network lead to the computer or satellite receiver. The data is transferred through
the mains wiring. No problems with wireless interference of wireless security problems.

Additional single units can be added to other rooms - up to 200! Ideal for Linux based receivers like CubeRevo, Technomate and Dreambox where the receiver may not be near a network point but is near a mains socket.

We tested Homeplug with a standard home network setup that incorporated a 4-port wireless router and there was nothing to do, the item worked straight out of the box.

Product Features:

  • High-Speed Powerline adapter with Ethernet interface for fast data transfer over existing household electrical circuit
  • Fully compatible with HomePlug 1.0 & Homeplug Turbo
  • 56 Bit AES Link Encryption with Key Management for secure communication
  • High-Speed transfer rates of 85 Mbps makes it possible to transfer any type of data
  • Use existing electrical wiring at any power sockets with up to 200mtrs operation range
  • Simple plug and play installation
  • Fully compliant with IEEE 802.3/802.3u 10/100Mbps RJ45
  • Supports 10/100 fast Ethernet Connection
  • Supports Auto MDI / MDIX
  • Allows users to connect PCs, notebooks and other Ethernet devices via any power socket
  • Low power consumption
    Technical Details

Technical Specification:

  • Plug & Play
  • Peer to Peer Networking
  • 56-bits DES link encryption with key management
  • ODFM modulation
  • Supports QAM, 256 / 64 / 16 DBPSK, DQPSK, ROBO
  • Integrated Quality of Service (QoS)
  • Compatible with Windows ME, 2000, XP & Vista, Mac OS & Linux Operating systems

Protocol/Standards

HomePlug 1.0 specification, IEEE 802.3 10/100 Ethernet (100Mbps) and IEEE 802.3u Fast Ethernet Compliant

10/100 Mbps AutoMDI/MDIx Support

85Mbps Homeplug 1.0 compatible

Modulation Support OFDM 256/64/16, DQPSK, DBPSK and ROBO Modulation Scheme
Frequency Band 4.3 Mhz to 20.9 Mhz band
Quality of Service

Forward Error Correction (FEC) support

Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment

CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet packets via Packet Encapsulation

Four Level prioritized random access method

Segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance

Security Support 56 bit DES Encryption with key management for secure powerline communications (Utilise Windows 98SE, 2000, ME, XP, Vista to enable encryption)
Hardware

Intellon INT5500 Integrated Single-chip Powerline Network Transceiver

Intellon INT1200 Analog Front End IC

PLATFORM SUPPORT

OS Independent with TCP/IP protocol installed. ( Download the utility for Vista below )

POWER SUPPLY

Switch Mode 90V-264V Supply for Europe/UK/US/Australia plugs
LED Indicators

1 x Power LED

1 x Powerline Activity Status LED

1 x Ethernet Link/Activity Status LED

Temperature

Operating : 0 o to 40 o Celsius

32 o to 104 o Fahrenheit

Non-Operating : -25 o to 70 o Celsius

-13 o to 158 o Fahrenheit

Humidity

Operating : 30% to 80% Relative Humidity (Non-Condensing)

Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)

__ifHasImage__
__endifHasImage__
__title__
__description__
__LD_PRODUCT_CLICKHERE__
__ifPurchasable__
__endifPurchasable__