Technomate TM-Twin OE

Technomate TM-TWIN

Technomate’s flagship twin tuner satellite receiver, the TM-Twin, you can watch satellite channels in glorious High-Definition (HD), Full HD 1080p with Dolby Digital Plus to give you a superior audio experience. It’s also 3D ready*. Not content with standard components, the TM-Twin's components are all high-grade, high-quality to deliver you the best performing satellite receiver.
 
It is an Open Embedded satellite receiver which has Third Party Software to give you more functions than a standard satellite receiver.
Not leaving the Standard Definition (SD) channels behind, Technomate has developed a built-in hardware Upscaler to improve the picture quality of Standard Definition (SD) channels via the HDMI output.

What Satellite magazine (July 2011) further said that the 'upscaled SD channels appear solid and lifelike'.
You can use a USB Hard Disk Drive (HDD) or an internal 3.5" Hard Disk Drive to record all your favourite channels, listen to your music and watch a slideshow of your photos.
The luxurious Vacuum Fluorescent Display (VFD) front panel displays: channel names, recording status, playback status...and more (display may vary to the above).
To watch the same channel on another TV, there’s an RF modulator at the rear of the satellite receiver, so you can watch all your channels in your bedroom (requires a cable to be connected from the RF modulator to the second TV).
 
The silent temperature and speed controlled fan cools the TM-Twin only when needed and the speed level can also be adjusted.
It’s even Eco-friendly with 1W standby power consumption.

 *not all 3D formats are compatible & requires a 3D TV

Features:

• Fully MPEG-2, MPEG-4 & H.264 Compliant
• DVB-S & DVB-S2 Complaint
• 2x HD Satellite (DVB-S2) Tuners
• 405MHz Broadcom Dual Core MIPS Processor
• 256 Mbyte NAND Flash & 384 Mbyte DDR2 Ram
• Linux Open Embedded
• Output Resolution: Full HD 1080p, 1080i, 720p, 576p, 576i & 3D Ready*
• 1x Smart Card Reader & 2x Common Interface (CI) Slots
• HDMI & Component YPbPr outputs
• Dolby Digital Plus compliant via optical S/PDIF output
• 3x USB 2.0 Ports (1x front and 2x rear)
• Ethernet Port
• Vacuum Fluorescent Display (VFD) to display channel names, status, etc
• Temperature & Speed Controlled Fan
• Unlimited Channel Memory
• 2x Scart Outputs with RGB and CVBS support
• Super sensitive tuner for very weak signals and weak transponders
• Less than 1 second channel change
• DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) compatible
• PLL type RF-Modulator (Ch. 21- 69) and UHF tuning function
• Extended EPG and programme reservation on EPG
• Support for multiple audio language broadcasts
• Supports PAL/NTSC systems
• Parental Control
• SCPC & MCPC receivable from C/Ku band satellites LNBs supported: Universal, Single, Single S & C band wideband LNBs
• 4:3 & 16:9 screen formats
• Timer & multi-event timer functions
• Automatic FEC and PID detection and manual entry of PID values
• Loop through tuner
• Real time clock
• Teletext & Subtitle support by OSD and VBI
• LNB short circuit protection onboard
• 1W Standby power consumption option

Specification

• Video Decoder: MPEG-2, MPEG-4 HD, H.264, PAL, NTSC 
• Audio Decoder: PEG-1/2, Dolby Digital Plus AC3 Audio 
• Tuner: 2x DVB-S
• High-Definition HD: 1080p, 1080i, 720p, 576p, 576i 
• Front Display: Vacuum Fluorescent Display (VFD
• Front USB: 1
• Smart Card Reader: 1
• Common Interface (CI) Slot: 1
• Video Interface: HDMI, Component YPbPr, 1x TV Scart (RGB, CVBS), 1x VCR Scart (CVBS), RCA
• Audio Interface: Optical S/PDIF 
• Ethernet Interface: 10/100Mbps
• Rear USB: 2x USB 2.0
• RF Modulator: CH21-69, PAL-I/G/K/M, NTSC
• Internal SATA Support: Yes
• Fan: Temperature & Speed Controlled 
• Input Voltage: AC 90~250V, 50/60Hz
• CPU: 405MHZ
• SDRAM / Flash: 384Mbytes / 256Mbytes
• Standby Consumption: Under 1Watt
• Size: 340x65x255 (mm) 
• Weight: 2.0 Kg
  

12 Month RTB warranty is supplied on all satellite receivers unless otherwise stated.