Emitor

Digiair Pro DVB-T2 Digital Aerial TV Terrestrial Meter

The new Emitor´s DIGIAIR Pro T2 is developed in Sweden for exact alignment and adjustment

of terrestrial antennas for DVB-T and DVB-T2. This is made for both analog (dBuV) and digital DVB-T/T2– COFDM. DIGIAIR Pro T2 is microprocessor controlled, making it very reliable and accurate.

Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode.
 

Digiair Pro DVB T2 Manual..

Digiair Pro DVB T2 Leaflet...

Emitor´s DIGIAIR ProT2 is developed in Sweden for exact alignment and adjustment

of terrestrial antennas for DVB-T and DVB-T2.

This is made for both analog (dBuV) and digital DVB-T/T2– COFDM.

DIGIAIR Pro T2 is microprocessor controlled, making it very reliable and accurate.

Signalstrength is presented on the LCD-display. In analog mode it shows a single

channel or six channels at the same time. You can also choose to view the signal in

spectrum mode.

In digital mode it displays the BER (bit error rate) and C/N (Carrier/Noise). Readout of

UCB (uncorrected bits) and CB (corrected blocks) is also easy to do.

Furthermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on

a loudspeaker.

DIGIAIR Pro T2 is very sensitive and can detect even the weakest signals.

DIGIAIR Pro T2 can feed Voltage (0/5/12/24 Volt) to external active antennas this

feature is short-circuit protected by an automatic fuse.

DIGIAIR Pro T2 is charged via an external DC power-source of 10 -15 volt.

The DIGIAIR PRO T2 operates with 8xAA rechargeable batteries. The unit will works

for at least 2 hours with fully charged batteries.

Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design.

 

Please check the attached manual for the full specifications .....

__ifPurchasable__
__endifPurchasable__